The Trulli AUX Wireless Remote can be mounted in a variety of ways to fit your vehicle setup. This guide covers all three mounting options included in your Trulli Vehicle Kit and shows you how to install each one using clear visuals, animated examples, and full installation videos.
Whether you prefer a clean dashboard mount, a sturdy vent clip, or an adhesive base, you can easily position your remote for quick access and safe control while driving.
Before you begin
Each Trulli Vehicle Kit includes three mounting options and a magnetic mount head:
- (1) CD Slot Mount Base
- (1) Air Vent Mount Base
- (1) Adhesive Dash Mount Base
- (1) Magnetic Mount Head
You will use one of the three bases along with the magnetic mount head to complete installation. The magnetic head allows your remote to attach securely and rotate freely once mounted.
CD Slot Mount
The CD Slot Mount is ideal for drivers who want a centered, eye-level placement without blocking air vents.
Step 1: Install the Mount Base
- With the center lever in the up position, slide the mount base into your vehicle's CD slot.
- Push the lever down to secure the mount in place.
Step 2: Attach the Magnetic Mount Head
- Place the tightening ring over the ball attachment point on the mount base.
- Attach the magnetic mount head to the ball.
Step 3: Position the Trulli Remote
- Center the rear of the Trulli Remote on the magnetic mount head.
- Adjust the angle to your preferred position.
- Tighten the ring to secure the mount head in place.
Watch: Bass50 CD Mount Installation
Vent Mount
The Vent Mount attaches directly to your vehicle's air vent louvers, providing a convenient, easy-to-reach location for your Trulli Remote.
Step 1: Install the Mount Base
- Locate the clip on the rear of the vent mount.
- Squeeze the clip to open it, then insert it into your vehicle's air vent louvers.
- Release the clip to secure the mount in place.
- Adjust the lower support foot as needed to stabilize the mount.
Step 2: Attach the Magnetic Mount Head
- Place the tightening ring over the ball attachment point on the mount base.
- Attach the magnetic mount head to the ball.
Step 3: Position the Trulli Remote
- Center the rear of the Trulli Remote on the magnetic mount head.
- Adjust the angle to your preferred position.
- Tighten the ring to secure the mount head in place.
Watch: Bass50 Vent Mount Installation
Dash Mount
The Dash Mount uses an adhesive base to securely attach your Trulli Remote to your vehicle's dashboard or another suitable flat surface.
Step 1: Prepare the Mounting Surface
- Choose a location on your dashboard where the remote will be easily accessible.
- Clean the mounting area with an alcohol pad to remove dirt, dust, and residue.
- Allow the surface to dry completely before continuing.
Step 2: Install the Mount Base
- Remove the protective backing from the adhesive on the bottom of the mount.
- Position the mount on the cleaned surface.
- Press firmly to secure the adhesive base to your dashboard.
Step 3: Attach the Magnetic Mount Head
- Place the tightening ring over the ball attachment point on the mount base.
- Attach the magnetic mount head to the ball.
Step 4: Position the Trulli Remote
- Center the rear of the Trulli Remote on the magnetic mount head.
- Adjust the angle to your preferred position.
- Tighten the ring to secure the mount head in place.