While we recommend using the Trulli App to pair your device to your Bass50, you can also connect manually via Bluetooth. This article walks you through that process—step by step, with visual cues and LED feedback explained.
For help pairing through the Trulli App, check out our Trulli App Guide
Not sure if the app is right for you? Check this article out: Do I need the Trulli App to use the Bass50?
Power on the Bass50
- Press and hold the Trulli button (center of the main control panel) for 1 second, then release.
- The Trulli button will ramp up in brightness, and the LED ring will pulse red during startup.
- Once powered on, the Trulli button will stay lit in white.
Enter Bluetooth Pairing Mode
- Press and hold the – and + buttons at the same time for 2 seconds.
- You’ll see a red animation moving clockwise around the LED ring.
- You’ll hear three pairing tones to confirm pairing mode is active.
At this point, the Bass50 is discoverable by your device.
Note: Pairing mode lasts for 2 minutes. If no connection is made, the Bass50 will exit pairing mode and play a 5-tone indicator. The LED ring will stop animating and the Trulli button returns to white. To try again, just repeat the steps above.
Connect Your Device
- Open your device’s Bluetooth settings (phone, tablet, or computer).
- Select “Trulli Bass50” from the list of available devices.
When successfully connected:
- The Trulli button turns blue
- The LED ring will animate upward from both sides and meet at the top
- A confirmation tone will play
Once paired, the Trulli button returns to white—you're ready to play.
Final Notes
You can pair the Bass50 to one device at a time. If you'd like to connect a new device, simply hold the – and + buttons again to re-enter pairing mode. For more tips on troubleshooting, check out Why won’t the Trulli app find my Bass50?